NEC SL1000 - Trunks Operator Setting

Program 20 : System Option Setup
20-36 : Trunk's Operator Setting
Level
IN
Description
Use Program 20-36 : Trunk’s Operator Setting to assign a trunk to an operator group.
Input Data
Trunk Port Number 001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
Item No. Item Input Data Default
01 Trunk’s Operator Setting
Allows the user to select Operator Group per
trunk when DISA is being used. After the user
enters the 6 digit DISA password if the user
dials 0 this command will decide which opera-
tor to route the call to.
0~15
(0 = Not assigned)
0
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-203