Program 22 : Incoming Call Setup
22-15 : VRS Delayed Message for Department Group
Level
IN
Description
Use Program 22-15 : VRS Delayed Message for Department Group to define for each Department
(Extension) Group the timers, VRS message number and tone kind for VRS Delayed Message. There
are 32 available Department Groups.
Input Data
Extension Group Number 01 ~ 32
Item No. Item Input Data Default
01 1
st
Delayed Message Start Time
Time before the VRS Delay Message is
played for Department Group.
0 ~ 64800 seconds 0
02 1
st
Delayed Message Number
VRS message that is used for the 1st De-
layed Message.
0 ~ 101
0 = No Message
101 = Fixed Message
101
03 1
st
Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st Delay
Message is not played.
0~255 (time) 0
04 2
nd
Delayed Message Number
VRS message that is used for the 2nd De-
layed Message.
0 ~ 101
0 = No Message
101 = Fixed Message
101
05 2
nd
Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd Delay
Message is not played.
0 ~ 255 (time) 0
06 Tone Kind at Message Interval
What is heard between the Delay Message.
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0
07 Disconnect Time After the End of VRS De-
layed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
0 ~ 64800 seconds
0 = No Disconnect
60
Conditions
None
Feature Cross Reference
• Department Group
ISSUE 1.0 SL1000/SL1100
Program
22
Programming Manual 2-261
To Next Page
Loading...
