NEC SL1000 - ANI;DNIS Service Options

Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI/DNIS service option setup for
E&M Class of Service.
Input Data
Class of Service 01 ~ 15
Item
No.
Item Input Data
Default Default
Related
Program
COS 01 COS 02 ~ 15
01 Receive Format
Use this option to specify the
format of the ANI/DNIS data
received from the Telco. Make
sure your entry is compatible
with the service the Telco pro-
vides. The character
*
indi-
cates a delimiter.
If Program 34-01-02 is
selected to 2 (MF), this
Program works only as
4=
*
ANI
*
DNIS
*
.
0 = Address
1=
*
ANI
*
2=
*
DNIS
*
3=
*
ANI
*
Address
*
4=
*
ANI
*
DNIS
*
5=
*
DNIS
*
ANI
*
(
*
= Delimiter Code)
0 0 34-01-02
34-09-02
02 Delimiter Dial Code
This option defines the charac-
ter Telco uses as a delimiter
(see entries1~5inItem1
above). Valid entries are0~9,
#, and
*
.
1~9,0,#,
***
34-09-01
03 Route Setup of Receive Dial
This option specifies the source
of the data the system uses to
route incoming ANI/DNIS calls.
If option 2 is selected, refer to
Program 34-09-04.
0 = Fixed Route (Item 08)
(No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
0 0 22-09-01
22-11-01
34-09-04
34-09-08
ISSUE 1.0 SL1000/SL1100
Program
34
Programming Manual 2-339