Alarm
No.
Type
Re-
port
Name
Content of
Alarm
Cause Action Recovery
Alarm
Status
66 2 0 SIP exten-
sion Li-
cense
Error.
More than the num-
ber of licenses to
which the SIP ex-
tension terminal
was turned on at
REGISTER.
• Wrong number
of licenses.
1 Confirm the
number of li-
censes for SIP
extension termi-
nals.
2 Check with
maker on un-
certain points.
When the
number of
registration
of SIP ex-
tension ter-
minals falls
below the
number of
licenses.
WAR
67 0 0 SIP illegal
Packet re-
ceived
The system re-
ceived illegal
packet.
A client or network
was illegal state.
Check with maker
on uncertain point,
when happening
frequently when
operating it.
INF
68 2 0 VoIPDB
DSP All
Busy Alarm
1 Provides alert
when all DSP
resources are
being used.
2 Used to trouble-
shoot or alerting
when upgrade is
needed.
Not enough DSP
resources in sys-
tem.
Install VMDB with
more DSP re-
sources.
Conditions
• The entire terminal that has an Alarm Display setting can be set at Program 90-50-01.
• System Alarm Type is shown despite the setting done at 90-10-01. If multiple Alarm Display Setting
is set, only one highest priority alarm will be shown on a LCD Display.
• The priority level (highest -> lowest) : Alarm 55 > Alarm 7 > Alarm 5 > Alarm 30 > Alarm 8 > Alarm
52> Alarm 29 > Free Demo License Period.
Feature Cross Reference
None
ISSUE 1.0SL1000/SL1100
Program
90
Program 90 : Maintenance Program2-516
To Next Page
Loading...
