EasyManua.ls Logo

NEC SL1000 - Page 537

NEC SL1000
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alarm
No.
Type
Re-
port
Name
Content of
Alarm
Cause Action Recovery
Alarm
Status
60 2 0 SIP Regis-
tration
Error Notifi-
cation.
1 The registration
of the SIP trunk
to the SIP
server failed.
2 The registration
of the SIP trunk
to the SIP
server failed in
the authentica-
tion.
3 There is no re-
sponse from the
SIP server to
the SIP registra-
tion request.
1 The setting of
the system
data is wrong.
2 The setting of
the router is
wrong.
3 It is an error to
the link of LAN.
4 Net side
trouble.
1 Confirm the fol-
lowing system
data setting --
Programs 10-
12, 10-28, 10-
29, 10-30, and
10-36.
2 Confirm the set-
ting of routers.
3 Confirm
whether abnor-
mality occurs
on the net side.
4 Confirm the au-
thentication
system data
setting.
5 Confirm wiring
and the system
data setting.
Please inquire
on uncertain
points of the
maker.
The error is
recovered
when nor-
mally con-
necting it.
ERR
REC
61 0 0 SIP exten-
sion
trouble in-
formation.
1 Failed registra-
tionoftheSIP
extension termi-
nal.
2 The SIP exten-
sion terminal
was not ac-
quired:
At Regist of
the SIP ex-
tension ter-
minal to
SL1000/
SL1100.
When you
cannot ac-
quire the
DSP re-
source when
it sent.
1 The registered
portisusedby
other exten-
sion.
2 The license is
insufficient.
3 DSP of
VoIPDB not
acquired.
1 Confirm wiring
and the system
data setting.
2 Confirm
whether each
equipment such
as access
points works
normally.
ERR
REC
63 0 0 SIP-MLT
trouble in-
formation.
1 The trouble oc-
curred by the
SIP-MLT rela-
tion.
2 The DSP re-
source could not
be acquired at
incoming/
outgoing.
3 The negotiation
with VoIPDB
failed.
1 The packet
loss occurred
on the network
or the wiring
cutting oc-
curred.
2 DSP of
VoIPDB not
acquired.
Confirm whether
each equipment
such as wirings
and HUB is normal.
WAR
64 1 0 VoIPDB
LAN Link
Error.
The link of LAN of
VoIPDB came off.
1 LAN cable is
defective.
2 Connected
HUB broken.
3 Defect CPU.
1 Confirm LAN
connector and
wiring.
2 Check with
maker on un-
certain points.
When the
connection
returns nor-
mally, the
error is re-
covered.
ERR
REC
65 0 0 VOIPDB
trouble in-
formation.
When DSP of
VoIPDB notifies
Error.
VoIPDB. Defec-
tive.
1 Possibility of
defective hard-
ware.
2 Check with
maker on un-
certain points.
WAR
ISSUE 1.0 SL1000/SL1100
Program
90
Programming Manual 2-515

Table of Contents

Other manuals for NEC SL1000

Related product manuals