NEC SL1000 - Page 189

Item
No.
Item Input Data
Default
Related Pro-
gram
Note
COS 01 ~ 15
12 Department Group Step
Calling
Turns off or on an extension
to use Department Group
Step Calling.
0=Off
1=On
1
13 ISDN CLIP
Determines if the ISDN call-
ing line identity presentation
and screening indicators are
allowed.
0=Off
1=On
1
10-03-05
15-01-04
14 Call Address Information 0=Off
1=On
0
15 Block Outgoing Caller ID
Turns off or on the system
ability to automatically block
outgoing Caller ID informa-
tion when a user places a
call.
If this option is on, the sys-
tem automatically inserts the
Caller ID block code (defined
in Program 14-01-21) before
the user-dialed digits.
0=Off
1=On
0
14-01-20
14-01-21
16 Display E911 Dialed Exten-
sion Name and Number
Turns off or on an extension
to display the name and
number of the extension that
dialed E911.
0=Off
1=On
0
17 ARS Override of Trunk Ac-
cess Map
Turns off or on an extension
ability to override the trunk
access map programming
for outgoing calls.
0=Off
1=On
0
19 Hotline for SPK
The ability of an extension to
have Hotline activated or
deactivated when going off
hook via the speaker key.
0=Off
1=On
0 20-08-09
20 Hot Key Pad
The ability of an extension to
makeacallbyjustdialing
the number without first
going off hook.
0=Off
1=On
0
21 Automatic Trunk Seizing
by Pressing SPK Key
The ability of an extension to
automatically access Trunk
Route when going off hook
via the speaker key.
0=Off
1=On
0
22 Voice Over to Busy Virtual
Extension
The ability of an extension to
make Voice Over to Busy
Virtual Extension.
0=Off
1=On
0 (SL1100)
23 Display indication for se-
curity sensor detection
0=Off
1=On
0
24 Display indication for
emergency call by remote
inspection
0=Off
1=On 0
Conditions
None
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-167