NEC SL1000 - Page 195

Item No. Item Input Data
Default
COS01~15
14 Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk Trans-
fer is not possible.
0=Off
1=On
0
15 VRS Personal Greeting (Message Greet-
ing)
Turns off or on a Service Code to record, lis-
ten to, or erase the Personal Greeting Mes-
sage.
0=Off
1=On
1
16 Call Redirect
Turns off or on a multiline terminal user ability
to transfer a call to a predefined destination
(such as an operator, voice mail, or another
extension) without answering the call.
0=Off
1=On
1
17 Department Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department
Group.
0=Off
1=On
1
18 No Recall
No Recall set to "Allow" (1) will not stop trans-
ferred calls from recalling from a virtual exten-
sion.
0=Off
1=On
0
19 Hold/Extended Park
Determine if an extension Class of Service
should allow either a normal or extended
Park.
0=Off
1=On
0
20 No Callback
Turns off or on an extension to receive call-
backs.
0=Off
1=On 0
21 Restriction for Tandem Trunking on Hang
Up
Allow (0) or Deny (1) an extension user ability
to set up a tandem/conference call automati-
cally when they hang up.
0 = Allow
1 = Deny
0
22 Restricted Unsupervised Conference
Allow (0) or Deny (1) an extension ability to
initiate an unsupervised conference.
0 = Allow
1 = Deny 0
23 VE Call Forward Set/Cancel
Turn on or off an extension ability to set or
cancel call forwarding for a virtual extension.
0=Off
1=On 0
24 Trunk Park Hold Mode
Set the hold type when a trunk call is put on
hold by an extension.
0 = Non Exclusive Hold (Off)
1 = Exclusive Hold (On) 0
25 Transfer Park Call
Turn off or on an extension ability to transfer a
parked call.
0=Off
1=On 0
26 Station Park Hold mode 0=Off
1=On
0
27 Call Park Automatically Search 0=Off
1=On
1
28 Both Ring Enhancement 0 = Normal
1 = Enhanced
0
Conditions
None
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-173