NEC SL1000 - Page 199

Item No.
Item Input Data
Default
Related Program
COS 01 ~ 15
13 Continued Dialing (DTMF) Signal on
ICM Call
Turn off or on an extension user ability to
use Continued Dialing, which allows
DTMF signal sending while talking on ex-
tension.
0=Off
1=On
1
14 Department Calling (PLT No Called Ex-
tension)
Turns off or on an extension user ability to
call a Department Group Pilot.
0=Off
1=On
1
15 Barge-In, Initiate
Turns off or on an extension user ability to
barge-in on other's calls.
0=Off
1=On 1
16 Barge-In, Receive
Turns off or on an extension ability to
have other extensions barge-in on calls.
0=Off
1=On 1
17 Barge-in Tone/Display (Intrusion Tone)
Turns off or on the Barge-In tone. If on,
callers hear an alert tone and their display
indicates the Barge-In when another ex-
tension barges into their conversation. If
off, there is no alert tone or display indica-
tion.
0=Off
1=On
1
18 Programmable Function Key Program-
ming (General Level)
Turns off or on extension user ability to
program General function keys using Ser-
vice Code 851 (by default). (Refer to Pro-
gram 20-07-10 for Service Code 852.)
0=Off
1=On
1
19 Selectable Display Messaging (Text
Messaging)
Turns off or on an extension user ability to
use Selectable Display Messaging.
0=Off
1=On
1
20 Account Code/Toll Restriction Opera-
tor Alert (Restricted Operation Trans-
fer)
Turns off or on operator alert when an
extension user improperly enters an Ac-
count Code or violates Toll Restriction.
0=Off
1=On
1
21 Extension Name
Turns off or on an extension user ability to
program its name.
0=Off
1=On 1
22 Busy Status Display (Called Party Sta-
tus)
Turns off or on the ability to display the
detailed state of the called party.
0=Off
1=On
0 20-13-06
23 Display the Reason for Transfer
Select whether an extension should dis-
play the reason a call is being transferred
to their extension (Call Forward Busy,
Call Forward No Answer, and DND).
0=Off
1=On
0
24 Privacy Release by Pressing Line Key
Turns off or on a user ability to press a
line key to barge into an outside call. The
Barge-In feature must be enabled if this
option is to be used.
0=Off
1=On
0
26 Group Listen
Turns off or on an extension user ability to
use Group Listen.
0=Off
1=On 1
27 Busy on Seizing Virtual Extension
If set to 1, you can call a busy extension
which is talking on a virtual extension key.
Program 20-13-06 (Call Waiting) must be
set to 0 for this option to work.
0=Off
1=On
1
ISSUE 1.0 SL1000/SL1100
Program
20
Programming Manual 2-177