NEC SL1000 - Page 423

Item
No.
Item Input Data Default Description
02 Override Mailbox Category
(Override MB Ctg)
Use this option to specify the category
of the mailbox where Automated Atten-
dant calls should route when you en-
able Answer Schedule Override.
• If the Override Mailbox is a Sub-
scriber Mailbox, the outside caller
hears the mailbox greeting (if re-
corded) and can leave a message.
• If the Override Mailbox is a Master
Mailbox, the outside caller shears
the recorded announcement. De-
pending on how the Announcement
Mailbox is programmed, InMail
then hangs up, reroutes the call, or
provides additional dialing options.
• If the Override Mailbox is a Rout-
ing Mailbox, the outside caller
hears the instruction menu and can
dial any option allowed by the as-
sociated Dial Action Table.
If any of the Input Data val-
ues are entered, the terminal
displays the Override Mail-
box Number selection
(below).
0 = Undefined
1 = Subscriber Mailbox
-STA
2 = Master Mailbox
3 = Routing Mailbox
0 Category0=SkipMailboxNo.
setting
Category 1 = Mailbox No.
should be1~128.referto
<
47-02 : InMail Station Mailbox
Options on page 2-384
>
(SL1000)
Category 1 = Mailbox No.
should be1~120.referto
<
47-02 : InMail Station Mailbox
Options on page 2-384
>
(SL1100)
Category 2 = Mailbox No.
should be1~32.referto
<
47-03 : InMail Group Mailbox
Options on page 2-388
>
Category 3 = Mailbox No.
should be1~32.referto
<
47-07 : InMail Routing Mail-
box Options on page 2-393>
Override Mailbox Number
(Override MB Num)
Use this option to specify the mailbox
where Automated Attendant calls
should route when you enable Answer
Schedule Override. The mailbox num-
ber you select in this option should
match the mailbox category specified
in 47-11-02 : Override Mailbox Cat-
egory above.
Up to 3 digits (using 0 ~
9)
No setting Category0=SkipMailboxNo.
setting
Category 1 = Mailbox No.
should be1~128.referto
<
47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1000)
Category 1 = Mailbox No.
should be1~120.referto
<
47-02 : InMail Station Mailbox
Options on page 2-384>
(SL1100)
Category 2 = Mailbox No.
should be1~32.referto
<
47-03 : InMail Group Mailbox
Options on page 2-388
>
Category 3 = Mailbox No.
should be1~32.referto
<
47-07 : InMail Routing Mail-
box Options on page 2-393>
ISSUE 1.0 SL1000/SL1100
Program
47
Programming Manual 2-401