NEC SL1000 - Page 507

Item No. Item Input Data Default
45 iLBC Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer of iLBC is
set. Jitter is the variation in the time between packets
arriving and the buffer allows this variation to be ab-
sorbed.
0 ~ 255 ms 30
46 iLBC Jitter Buffer - Standard
Set the average iLBC Jitter Buffer.
0 ~ 255 ms 60
47 iLBC Jitter Buffer - Maximum
Set the maximum iLBC Jitter Buffer.
0 ~ 255 ms 120
48 ILBC payload number
The payload number of iLBC is set. However, the
same number as Item 31 cannot be set.
96 ~ 127 98
49 RTP Filter 0=Disable
1 = Enable
1
50 Fax Relay mode 0=Disable
1 = Enable
0
51 T.38 Protocol mode 0=RTP
1 = UDPTL
1
52 Fax Max Rate 1 = V.27ter, 4800 bps
3 = V.29, 9600 bps
5 = V.17, 14400 bps
5
56 Low Speed Data Redundancy 0~2 0
57 High Speed Data Redundancy 0~2 0
58 TCF Handling 0 = Local
1= Network
1
61 T.38 RTP Format Payload Number 96 ~ 127 100
62 DTMF Level mode 0 = VoIPDB Unit
1=MainSoft
0
63 DTMF Level High 1=-33dBm
:
28=-6dBm
28
64 DTMF Level Low 1=-33dBm
:
28=-6dBm
28
Conditions
None
Feature Cross Reference
None
ISSUE 1.0 SL1000/SL1100
Program
84
Programming Manual 2-485