NEC SL2100 - Service Code Setup (for Service Access)

Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. Y
ou can customize additional Service Codes in Programs 11-10,
11-11, and 11-14 through 11-16.
The following chart shows:
• The number of each code (01 ~ 64).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing (Item 05) cancels a previously set Camp- On.
• Programs that may be affected with the changing the code.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Call Forward/Do
Not Disturb
Override
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT
Activating Call Forwarding/Do Not
Disturb Override. This code is avail-
able only if you disable the voice
mail Single Digit dialing code in Pro-
gram 11-16-09.
707
02 Conference 0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT #1
03 Call waiting (off-
hook signaling)
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 709
04 Camp on/Call
waiting call back
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 750
05 Cancel Camp-On 0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 770
06 Switching of
Voice Call and
Signal Call
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 712
07 Step Call 0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 708
08 Barge-In 0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT 710
09 Change to STG
(Department
Group) All Ring
0~9,
*
, # Maximum of
8 digit
Terminal: MLT, SLT No Setting 16-02
10 Speed Dial Com-
mon/Station
0~9,
*
, # Maximum of
8 digit
Assign the service code used for ac-
cessing common speed dialing (sys-
tem speed dialing) bins.
The service code assigned must be
within your valid numbering plan in
PRG.
#2
SL2100 ISSUE 2.0
2-82 Program 11 : System Numbering
Program
1
1