Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Level:
SA
Description
Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line
keys.
For certain functions, you can append data to the key basic function. For example, the function 26
appended by data 1 makes a Group Call Pickup key for Pickup Group 1. You can also program
Function Keys using Service Codes.
T
o clear any previously programmed key, press 000 to erase any displayed code.
Input Data
Extension Number Maximum eight digits
Key Number 1 ~ 32
Default Settings
Line Key Function Number Additional Data
LK01
01 (Trunk Line Key) 1
: : :
LK12
01 (Trunk Line Key) 12
LK13 0 (No Setting) 0 (No Setting)
: : :
LK32 0 (No Setting) 0 (No Setting)
Item No. Item Input Data Additional Data
01 Line Key Number 1 ~ 32 Refer to Table 2-3 Function Number
List on page
2-150.
Function Number 0 ~ 99, #0 ~ #99 Refer to Table 2-3 Function Number
List on page 2-150.
Default
Programmable keys 1 ~ 12 are Trunk Line keys (key 1 = T
runk Line 1, key 2 = Trunk Line 2, etc.). All
other programmable keys are undefined.
Function Number List
ISSUE 2.0 SL2100
Programming Manual 2-149
Program
15
To Next Page
Loading...
