Program 21 : Outgoing Call Setup
21-12 : ISDN Calling Party Number Setup for Trunks
Level:
IN
Description
Use Program 21-12 : ISDN Calling Party Number Setup for Trunks
to assign Calling Party
Numbers for each trunk (maximum 16 digits per entry). When a call is made by an extension which
does not have an Extension Calling Number assigned (Program 21-13), the system sends the calling
number for the ISDN trunk defined in 21-12.
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the data in
Program 21-13.
Input Data
Trunk Port Number 1 ~ 128
Item
No.
Item Input Data Description Default
01 Calling Party Number
Data
Maximum of 16 digits (0
~ 9,
, #)
Most Telco's will only ac-
cept 10 digits.
This program is used to assign a calling
party number per trunk.
If CPN information is programmed on both
the trunk and station when a call is made
the CPN from the station will be sent to the
Telco.
No Setting
Conditions
None
Feature Cross Reference
• ISDN Compatibility
ISSUE 2.0 SL2100
Programming Manual 2-271
Program
21
To Next Page
Loading...
