Program 25 : VRS/DISA Setup
25-03 : VRS/DISA Transfer Ring Group W
ith Incorrect
Dialing
Level:
IN
Description
Use Program 25-03 : VRS/DISA Transfer Ring Group W
ith Incorrect Dialing to set what happens
to a call when the DISA or Automated Attendant caller dials incorrectly or waits too long to dial. The
call can either disconnect (0) or Transfer to an alternate destination (a ring group or voice mail). When
setting the DISA and DID Operating Mode, make an entry for each Night Service mode.
Input Data
Trunk Port Number 1 ~ 128
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default Related
Program
01 Incoming Group Number 0 = Disconnect
1 ~ 50 = Incoming Ring Group
102 = InMail
103 = Centralized VM
104 = Assign the Speed Dial Number
0 22-04
Conditions
None
Feature Cross Reference
• Direct Inward System Access (DISA)
SL2100 ISSUE 2.0
2-322 Program 25 : VRS/DISA Setup
Program
25
To Next Page
Loading...
