NEC SL2100 - Section 1 PROGRAMMING YOUR SYSTEM

Programming the SL2100
Section 1 PROGRAMMING YOUR SYSTEM
The information contained in this chapter provides the information necessary to properly program your
system.
The programming blocks are organized into the following programming modes.
Program Number : Program Name
Program 10 : System Configuration Setup on page 2-3
Program 11 : System Numbering on page 2-64
Program 12 : Night Mode Setup on page 2-96
Program 13 : Speed Dialing on page 2-105
Program 14 : Trunk, Basic Setup on page 2-114
Program 15 : Extension, Basic Setup on page 2-132
Program 16 : Department Group Setup on page 2-175
Program 20 : System Option Setup on page 2-180
Program 21 : Outgoing Call Setup on page 2-256
Program 22 : Incoming Call Setup on page 2-284
Program 23 : Answer Features Setup on page 2-309
Program 24 : Hold/Transfer Setup on page 2-312
Program 25 : VRS/DISA Setup on page 2-320
Program 26 : ARS Service on page 2-337
Program 30 : DSS/DLS Console Setup on page 2-343
Program 31 : Paging Setup on page 2-353
Program 32 : Door Box and Sensor Setup on page 2-364
Program 34 : Tie Line Setup on page 2-368
Program 35 : SMDR Account Code Setup on page 2-380
Program 40 : Voice Recording System on page 2-386
Program 41 : ACD Setup on page 2-390
Program 42 : Hotel Setup on page 2-411
Program 44 : ARS/F-Route Setup on page 2-424
Program 45 : Voice Mail Integration on page 2-438
Program 47 : InMail on page 2-443
Program 80 : Basic Hardware Setup for System on page 2-484
Program 81 : Basic Hardware Setup for Trunk on page 2-503
Program 82 : Basic Hardware Setup for Extension on page 2-517
Program 84 : Hardware Setup for VoIP on page 2-530
Program 90 : Maintenance Program on page 2-571
Program 92 : Copy Program on page 2-636
Programming Manual 2-1
Programming the SL2100
2