NEC SL2100 - Dial Analysis Table for ARS;LCR

Program 26 : ARS Service & Least Cost
Routing
26-02 : Dial Analysis Table for ARS/LCR
Level:
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR
to set pre-transaction tables for selecting
Automatic Route Selection (ARS/F-Route).
• Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
• Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Dial Analysis Table Number 1 ~ 400
Item
No.
Item Input Data Default Related
Program
01 Dial Maximum of 16 digits (0 ~ 9,
*
, #, @) No Setting
02 ARS Service Type 0 = No Service (Call Restricted)
1 = Route to Trunk Group
2 = Select F-Route Access
0
03 Additional Data/Service
Number
Service type 1
0 ~ 50 (Trunk Group Number 0 = No Route)
101 ~ 150 (Networking ID)
Service type 2
[Not used F-Route Time Schedule]
0 ~ 100 (F-Route Table No.)
[Use F-Route Time Schedule]
0 ~ 100 (F-Route Selection No.)
0 44-04
44-05
04 ARS Class of Service 0 ~ 50
0 = No ARS Class (Call Restricted)
0
05 Dial Treatment for ARS 0 ~ 15 0
07 Network Specified Parameter
Table
0 ~ 16 0 26-12
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
SL2100 ISSUE 2.0
2-338 Program 26 : ARS Service & Least Cost Routing
Program
26