NEC SL2100 - Private Call Assignment Setup

Program 22 : Incoming Call Setup
22-18 : Private Call Assignment Setup
Level:
IN
Description
Use Program 22-18: Private Call Assignment Setup to define assignment and incoming ring pattern
for Private Calls.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Transfer Mode 0 = Not Defined (Pri-
vate call will not trans-
fer to a user in the sys-
tem, can be routed to
VRS message in PRG
40-10-06.)
1 = Internal Dial (Speci-
fied in PRG 22-18-02)
2 = Incoming Ring
Group (Specified in
PRG 22-04)
Leave this program set to (0) Not
Defined to route the Private caller to
a VRS message to refuse the call.
This program can also be used to
route the Private caller to an internal
destination (PRG 22-18-02) or a
Ring Group (PRG 22-04).
0 14-01-27
15-02-02
40-10-06
02 Destination Num-
ber
1 = Internal Dial (up to
36 digits)
0 ~ 9,
*
, #, P, R, @
2 = Incoming Ring
Group
0 ~ 50
No Setting 14-01-27
15-02-02
40-10-06
SL2100 ISSUE 2.0
2-306 Program 22 : Incoming Call Setup
Program
22