NEC SL2100 - Door Box Basic Setup

Program 32 : Door Box and Sensor Setup
32-03 : Door Box Basic Setup
Level:
IN
Description
Use Program 32-03 : Door Box Basic Setup to select the chime pattern and gain level for each Door
Box. There are six distinctive chime patterns. The chime tones are defined in 80-01 : Service Tone
Setup. on page 2-484
The Door Box feature is called Door Phone when programming via WebPro and using a multiline terminal.
Input Data
Door Box Number 1 ~ 6
Item
No.
Item Input Data Description Default Related
Program
01 Chime Pattern 0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
Per door box specify the chime pat-
tern for ringing.
Doorphone 1 =
Chine Pattern 1
Doorphone 2 =
Chine Pattern 2
Doorphone 3 =
Chine Pattern 3
Doorphone 4 =
Chine Pattern 4
Doorphone 5 =
Chine Pattern 5
Doorphone 6 =
Chine Pattern 6
80-01
02 CODEC Transmit
Gain Setup
1 ~ 57 (- 15.5 ~
+ 12.5dB)
This program controls the gain lev-
els from the system to the door box.
32
03 CODEC Receive
Gain Setup
1 ~ 57 (- 15.5 ~
+ 12.5dB)
This program controls the gain lev-
els from the door box to the system.
32
Conditions
None
Feature Cross Reference
• Door Box
SL2100 ISSUE 2.0
2-366 Program 32 : Door Box and Sensor Setup
Program
32