NEC SL2100 - Multi-Device Group Setup

Program 20 : System Option Setup
20-63 : Multi-Device Group Setup
Level:
SA
Description
This program setup the Multi-Device Group.
Input Data
Group Number 1 ~ 50
Item
No.
Item Input Data Description Default Related
Program
01 Pilot Extension
Number
Dial (Up to 8 digits) Set the extension number of the pi-
lot terminal. It is an error if it is not
the extension number. Duplicated
setting with the same group or the
other group is not allowed.
No Setting
11-02
02 Member Exten-
sion Number 1
Dial (Up to 8 digits) Set the extension number of the
member terminal1. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
03 Member Exten-
sion Number 2
Dial (Up to 8 digits) Set the extension number of the
member terminal2. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
04 Member Exten-
sion Number 3
Dial (Up to 8 digits) Set the extension number of the
member terminal3. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
05 Member Exten-
sion Number 4
Dial (Up to 8 digits) Set the extension number of the
member terminal4. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
06 Member Exten-
sion Number 5
Dial (Up to 8 digits) Set the extension number of the
member terminal5. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
07 Member Exten-
sion Number 6
Dial (Up to 8 digits) Set the extension number of the
member terminal6. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
08 Member Exten-
sion Number 7
Dial (Up to 8 digits) Set the extension number of the
member terminal7. It is an error if it
is not the extension number. Dupli-
cated setting with the same group or
the other group is not allowed.
No Setting 11-02
SL2100 ISSUE 2.0
2-250 Program 20 : System Option Setup
Program
20