Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Description
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Loop Key
Operation Mode
0 = Keep Lamp
1 = Extinction
1
Mode 0 = Keep Lamp 1 = LED Off
Incoming : 300 IPM Red blink
Talking : Green Lighting
(on Talking TEL)
LED Off
Holding :
60 IPM Green
blink (on holding
TEL)
LED Off
04 Retrieve the Line
After Transfer
0 = Extinction
1 = Keep Lamp
Enable (1) or dis-
able (0) an exten-
sion ability to an-
swer a call after it
has been trans-
ferred, but before
it is answered.
1
05 Headset Busy
Mode
0 = No (Disable)
1 = Yes (Enable)
Set the condi-
tions under which
a headset exten-
sion is busy to in-
coming callers.
0 20-09-07
06 Pre-selection Time 0 ~ 64800 seconds When a multiline
terminal user pre-
selects a line key,
the system re-
members the pre-
selection for this
time.
5
07 Display mode of
Date and Time
1 ~ 10 Set how the Time
and Date appear
on display tele-
phones. There
are eight display
modes.
3
08 LCD Display Hold-
ing Time
0 ~ 64800 seconds 5
09 Disconnect Super-
vision
0 = Disable (Off)
1 = Enable (On)
Use this option to
enable or disable
disconnect super-
vision for the sys-
tem trunks.
1
SL2100 ISSUE 2.0
2-182 Program 20 : System Option Setup
Program
20
To Next Page
Loading...
