Program 15 : Extension, Basic Setup
15-14 : One-Touch Keys
Level:
SB
Description
Use Program 15-14 : One-Touch Keys
to define the One-Touch key data for each multiline terminal.
For each Wireless telephone to use the Transfer When Out of Range feature, enter the destination
number (up to 36 digits) and name (up to 12 characters) into One-Touch bin 10. Make sure to add any
required trunk access codes for outside numbers. If this bin information is changed either through
15-14-01 or through user programming, the destination for the transferred calls is also changed.
Input Data
Extension Number Maximum eight digits
Key Number 01 ~ 10
Item
No.
Item Input Data Description Default
01 Dial Data Maximum of 36 digits (0
~ 9,
, #, @, P, R)
@ = Wait for Answer Su-
pervision - ISDN trunks
only
P = Pause - Analog
T
runk Only
R = Hook flash - Analog
Trunk Only
If PRG 15-02-60 is set to a (0) then the
stations personal speed dial entries are
programmed here.
Per key number (1 ~ 10) assign the tele-
phone number that is to be called when
the bin is accessed.
No Setting
02 Name Maximum of 12 charac-
ters
Per key number (1 ~ 10) assign a name to
be used when searching through the direc-
tory.
If a name is not assigned for a speed dial
bin the speed dial entry will not be listed in
the directory.
No Setting
Conditions
None
Feature Cross Reference
None
SL2100 ISSUE 2.0
2-164 Program 15 : Extension, Basic Setup
Program
15
To Next Page
Loading...
