NEC SL2100 - Single Digit Service Code Setup

Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
Level:
IN
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. Y
ou can customize additional Service Codes in
Programs 11-10 ~ 11-15.
The following chart shows:
• The number of each code (01 ~ 11).
• The function of the Service Code.
• The default entry. For example, dialing 1 (Item 03) when calling an extension switches the call from
either a voice or signal call (depending on how it is currently defined).
• Programs that may be affected by changing these codes.
Input Data
Item
No.
Item Input Data Default Related
Program
01 Step Call 0~9,
*
, # Maximum of 1 digit 2
02 Barge-In 0~9,
*
, # Maximum of 1 digit No Setting
03 Switching of Voice/Signal
Call
0~9,
*
, # Maximum of 1 digit 1
04 Call Waiting (Intercom off-
hook signaling)
0~9,
*
, # Maximum of 1 digit
*
05 Camp-On 0~9,
*
, # Maximum of 1 digit #
06 DND Override/Call forward
Override
0~9,
*
, # Maximum of 1 digit No Setting
07 Message Waiting 0~9,
*
, # Maximum of 1 digit 0
08 Voice Over 0~9,
*
, # Maximum of 1 digit 6
09 Access to Voice Mail 0~9,
*
, # Maximum of 1 digit 8
10 Department Group All Ring
Mode
0~9,
*
, # Maximum of 1 digit No Setting 16-01-05
11 Station Park Hold 0~9,
*
, # Maximum of 1 digit No Setting
Conditions
None
Feature Cross Reference
None
SL2100 ISSUE 2.0
2-92 Program 11 : System Numbering
Program
11