NEC SL2100 - Dial Analysis Extension Table

Program 44 : ARS/F-Route Setup
44-03 : Dial Analysis Extension Table
Level:
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis Extension Table
to set
the dial extension analysis table. These tables are used when the analyzed digits must be more than
eight digits. If the received digits do not match the digits set in tables 1 ~ 250, table number 252 is
used to refer to the next Extension Table Area (1 ~ 4) to be searched. If the received digits are not
identified in tables 1 ~ 250, the F-Route selection table number defined in table 251 is used.
Input Data
Extension Table Area Number 1 ~ 4
Dial Analysis Table Number 1 ~ 252
Dial Analysis Table Number : 1 ~ 250
Item
No.
Item Input Data Default Related
Program
01 Dial Up to 36 digits
Digits = 1 ~ 9, 0,
*
, #, @
(Press Line Key 1 for wild character @)
No Setting 44-02
02 ARS/F-Route Select Table
Number
[Not used F-Route Time Schedule]
0 ~ 100 (F-Route Table No.) <PRG 44-05>
[Use F-Route T
ime Schedule]
0 ~ 100 (F-Route Selection No.) <PRG 44-04>
0 44-01
44-04
44-05
Dial Analysis Table Number : 251
Item
No.
Item Input Data Default Related
Program
03 ARS/F-Route Select Table
Number
Not used F-Route Time Schedule]
0 ~ 100 (F-Route Table No.) <PRG 44-05>
[Use F-Route T
ime Schedule]
0 ~ 100 (F-Route Selection No.) <PRG 44-04>
0 44-01
44-03-01
44-04
44-05
Dial Analysis Table Number : 252
Item
No.
Item Input Data Default Related
Program
04 Next Table Area Number 0 ~ 4 0 44-03-01
ISSUE 2.0 SL2100
Programming Manual 2-427
Program
44