NEC SL2100 - Dial Block Setup

Program 21 : Outgoing Call Setup
21-09 : Dial Block Setup
Level:
IN
Description
Use Program 21-09 : Dial Block Setup to define the Dial Blocking Toll Restriction Class and Dial
Block Password to be used by the Supervisor extension.
Input Data
Item
No.
Item Input Data Description Default
01 Toll Restriction Class
With Dial Block
1 ~ 15 Assign a T
oll Restriction Class of Service
when the Dial Block feature is used.
15
02 Supervisor Password 0 ~ 9,
*
, #
(4-digit fixed)
Assign a 4-digit password to be used by
the supervisor to enable or disable Dial
Block for other extensions.
No Setting
Conditions
• This function works by password and Class of Service control (the supervisor is not an assigned
extension). If Dial Block is available for all Classes of Service, everyone may become a supervisor if
they know the Dial Block password.
Feature Cross Reference
None
SL2100 ISSUE 2.0
2-268 Program 21 : Outgoing Call Setup
Program
21