NEC SL2100 - DTMF Tone Receiver Setup

Program 80 : Basic Hardware Setup for System
80-03 : DTMF Tone Receiver Setup
Level:
MF
Description
Use Program 80-03 : DTMF Tone Receiver Setup
to define the various levels and timers for the
DTMF Tone Receiver.
DTMF Tone Receiver Type :
• 1 = DTMF Receiver for Extension
• 2 = DTMF Receive for Trunk1
• 3 = DTMF Receive for Trunk2
• 4 = DTMF Receive for Trunk3
• 5 = -- Reserve --
Input Data
DTMF Tone Receiver Type Number 1 = DTMF Receiver for Extension
2 = DTMF Receive for Trunk1
3 = DTMF Receive for T
runk2
4 = DTMF Receive for Trunk3
5 = -- Reserve --
Item
No.
Item Input Data Description Default
01 Detect Level 0 = 0 dBm ~ - 25 dBm
1 = - 5 dBm ~ - 30 dBm
2 = - 10 dBm ~ - 35 dBm
3 = - 15 dBm ~ - 40 dBm
4 = - 20 dBm ~ - 45 dBm
5 = - 25 dBm ~ - 50 dBm
6 = - 30 dBm ~ - 55 dBm
Used to select the systems DTMF tone de-
tection levels.
Refer below
02 Start Delay Time 0 ~ 255 (0.25 ms ~ 64
ms)
Refer below
03 Min. Detect Level 0 ~ 15
DTMF Tone 0 = - 10
dBm (0) to - 25 dBm (15)
DTMF T
one 1 = - 15
dBm (0) to - 30 dBm (15)
DTMF Tone 2 = - 20
dBm (0) to - 35 dBm (15)
DTMF Tone 3 = - 25
dBm (0) to - 40 dBm (15)
DTMF Tone 4 = - 30
dBm (0) to - 45 dBm (15)
DTMF Tone 5 = - 35
dBm (0) to - 50 dBm (15)
DTMF Tone 6 = - 40
dBm (0) to - 55 dBm (15)
Refer below
SL2100 ISSUE 2.0
2-490 Program 80 : Basic Hardware Setup for System
Program
80