Program 90 : Maintenance Program
90-05 : Slot Control
Level:
IN
Description
This program is available via telephone programming and WebPro not through PC Programming.
Use Program 90-05 : Slot Control to reset or delete (uninstall) Boards (slots 0 ~ 12).
Delete allows you to completely uninstall the board. You should do this if you want to remove a
interface board and plug it into a dif
ferent slot and still retain the port assignments. If a different type of
interface board is being installed in a slot previously used, the slot should be deleted (option 1) first
before installing the new interface board.
Reset allows you to send a reset code.
Input Data
Menu Number
1 = Delete
2 = Reset
3 = Set Busy Out
4 = Reset Busy Out
5 = Shutdown
Item
No.
Item Input Data Default
01 Slot Control Slot Number 0 ~ 12
Slot Number
Slot No.0 apply to VoIPDB or Built-in V
oIP.
-
Conditions
None
Feature Cross Reference
None
SL2100 ISSUE 2.0
2-576 Program 90 : Maintenance Program
Program
90
To Next Page
Loading...
