NEC SL2100 - FAX over IP Setup

Program 84 : Hardware Setup for VoIPDB
84-33 : FAX over IP Setup
Level:
IN
Description
This program sets the paramater of FAX over IP Function.
Input Data
Type
1 = H323 Trunk
2 = Networking
3 = SIP Trunk
4 = SIP Extension
5 = Reserved
6 = Reserved
Profile 1 ~ 6
Item
No.
Item Input Data Description Default
01 FAX Relay Mode 0 = Disable
1 = Enable
2 = Each Port Mode
0
02 T.38 Protocol mode 0 = R/U
1 = U/R
2 = RTP
3 = UDPTL
1
04
Maximum Jitter Buffer 0 ~ 300 ms (for VoIPDB
mode)
10 ~ 300 ms* (for Built-In
VoIP mode)
160
05 T.38 RTP Format Pay-
load Number
96 ~ 127 100
06 T.38 FAX Max Speed 0 = V.27ter; 4800 bps
1 = V.29; 9600 bps
2 = V.17; 14400 bps
2
07 T.38 Data Error Correc-
tion Mode
0 = Redundancy
1 = FEC
0
08 T.38 Error protection
depth for Signaling
0 ~ 2 This item is only available when you use
VoIPDB.
It is unavailable when you use Built-in
VoIP, which depends on the data of Item
No. 09.
0
09 T.38 Error protection
depth for Data
0 ~ 2 0
10 T.38 TCF Method 1 = VOIPDB
2 = G3FE
1
11 T.38 ECM(Error Cor-
rection Mode) Mode
0 = Disable
1 = Enable
1
SL2100 ISSUE 2.0
2-562 Program 84 : Hardware Setup for VoIPDB
Program
84