NEC SL2100 - SNMP Setup

Program 90 : Maintenance Program
90-64 : SNMP Setup
Level:
IN
Description
Use Program 90-64 : SNMP Setup to configure the SNMP function.
Input Data
Item
No.
Item Input Data Default
01 SNMP 0 = ON
1 = OFF
0
02 Community Name Up to 12 characters public
03 Target hosts 1 (IP Address) **. **. **. **
(** = figure)
0.0.0.0
04 Target hosts 2 (IP Address) **. **. **. **
(** = figure)
0.0.0.0
05 Target hosts 3 (IP Address) **. **. **. **
(** = figure)
0.0.0.0
06 Target hosts 4 (IP Address) **. **. **. **
(** = figure)
0.0.0.0
07 Target hosts 5 (IP Address) **. **. **. **
(** = figure)
0.0.0.0
Conditions
The Ether Port on the VoIPDB does not support the TRAP message detection on the LAN link.
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-631
Program
90