Program 21 : Outgoing Call Setup
21-08 : Repeat Dial Setup
Level:
IN
Description
Use Program 21-08 : Repeat Dial Setup to define the automatic Repeat Dial data.
Input Data
Item
No.
Item Input Data Description Default
01 Repeat Redial Count 0 ~ 255 Sets how many times a Repeat Redial au-
tomatically repeats if the call does not go
through.
3
02 Repeat Redial Interval
Time
0 ~ 64800 seconds
Set the time between Repeat Redial at-
tempts.
60
03 Repeat Dial Calling
Timer
0 ~ 64800 seconds After dialing the trunk call, Repeat Redial
maintains the call after this time. After this
time, the system terminates the call, waits
the Repeat Redial Time (Timer 02) and
tries again.
30
04 Time for Send Busy
Tone for ISDN Trunk
0 ~ 64800 seconds Sets the time (sec) to send out Busy Tone
with an ISDN line, when called party is
busy.
0
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-267
Program
21
To Next Page
Loading...
