NEC SL2100 - Short Ring Setup; Table 2-18 Frequency 1;2 Table

Program 80 : Basic Hardware Setup for System
80-09 : Short Ring Setup
Level:
IN
Description
Use Program 80-09 : Short Ring Setup to define the short ring tone for multiline terminals.
Input Data
Short Ring Number 1 ~ 32
Item
No.
Item Input Data Description Default
01 Frequency 1 0 = No Setting, 1 ~ 15 Refer to Table 2-18 Frequency 1/2 Table
on page 2-
496.
Refer below
02 Frequency 2 0 = No Setting, 1 ~ 15 Refer to Table 2-18 Frequency 1/2 Table
on page 2-496.
Refer below
03 Ring Cycle 0 = No Setting, 1 ~ 14 Refer to Table 2-19 Ring Cycle Table on
page 2-497.
Refer below
When a single tone is sent, Frequency 1/2 is set to the same value.
Table 2-18 Frequency 1/2 Table
Data Frequency (Hz)
1 392
2 440
3 494
4 523
5 587
6 659
7 698
8 784
9 880
10 988
11 1046
12 1175
13 1318
14 1397
15 1568
SL2100 ISSUE 2.0
2-496 Program 80 : Basic Hardware Setup for System
Program
80