NEC SL2100 - 5.2 Dir Soft Key; 5.3 VM Soft Key

Program 10 : System Configuration Setup
10-12 : CPU Network Setup
Level:
SA
Description
Use Program 10-12 : CPU Network Setup to setup the IP Address, Subnet-Mask, and Default
Gateway addresses.
Caution!
If any IP Address or NIC settings are changed, the system must be reset for the changes to take affect.
Input Data
Item
No.
Item Input Data Description Default
01 IP Address 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Set for CPU. 192.168.0.10
02 Subnet Mask 128.0.0.0 | 192.0.0.0 |
224.0.0.0 | 240.0.0.0 |
248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 |
255.192.0.0 |
255.224.0.0 |
255.240.0.0 |
255.248.0.0 |
255.252.0.0 |
255.254.0.0 |
255.255.0.0 |
255.255.128.0 |
255.255.192.0 |
255.255.224.0 |
255.255.240.0 |
255.255.248.0 |
255.255.252.0 |
255.255.254.0 |
255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
The setting of Subnet Mask is invalid when
all Host Addresses are 0.
If the network section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of Subnet Mask is invalid.
255.255.255.0
03 Default Gateway 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Assign the default gateway IP address. 0.0.0.0
SL2100 ISSUE 2.0
2-18 Program 10 : System Configuration Setup
Program
10