Program 22 : Incoming Call Setup
22-04 : Incoming Extension Ring Group Assignment
Level:
SA
Description
Use Program 22-04 : Incoming Extension Ring Group Assignment to assign extensions to Ring
Groups. Calls ring extensions according to Ring Group programming. Use Program 22-05 to assign
trunks to Ring Groups and use Program 22-06 to set the ringing for the phones. An Incoming Ring
Group (IRG) can have up to 48 extension numbers assigned.
There are 50 available Ring Groups.
An Incoming Ring Group (IRG) can have up to 48 extensions assigned, but when there is a call to the IRG,
Only the first 32 extensions will ring, for the rest 16 extensions, only their LED will blink.
Input Data
Incoming Ring Group Number 1 ~ 50
IRG Member Number 1 ~ 48
Item
No.
Item Input Data Description Default Related
Program
01 Extension Num-
ber
Maximum eight Digits Use this program to assign exten-
sions (up to 48) to Ring Groups.
Calls ring extensions according to
Ring Group programming.
Group01 has
101, 102, 103,
104, 105, 106,
107, and 108
(First 8 ports
ringing)
22-02
22-05
22-06
02 Delayed Ring 0 ~ 60 (Sec) Use this program to assign the tim-
ing of ring to the terminal that set to
delayed ring on PRG 22-04-01.
0: Immediate Ring
1 ~ 60: Ring after 1 ~ 60 sec
0 22-02
22-05
22-06
Conditions
None
Feature Cross Reference
• Ring Groups
ISSUE 2.0 SL2100
Programming Manual 2-289
Program
22
To Next Page
Loading...
