NEC SL2100 - Virtual Loop Back Port Reset

Program 90 : Maintenance Program
90-39 : Virtual Loop Back Port Reset
Level:
IN
Description
This program is available only via telephone programming and not through PC Programming.
Use Program 90-39 : Virtual Loop Back Port Reset
to reset to initial status.
Input Data
Item
No.
Item Input Data Description Default
01 Virtual Loop Back Re-
set
1→Hold [VLP-Reset] : Dial 1 + press Hold
(Press Hold only to cancel.)
-
Conditions
None
Feature Cross Reference
• PC Programming
ISSUE 2.0 SL2100
Programming Manual 2-613
Program
90