Program 84 : Hardware Setup for VoIPDB
84-23 : DT800/DT700 Multiline Basic Information Setup
Level:
IN
Description
Use Program 84-23 : DT800/DT700 Multiline Basic Information Setup to set the basic information
for the DT800/DT700 Multiline Terminal.
Input Data
Item
No.
Item Input Data Description Default
01 Registration Expire
Timer
60 ~ 65535 seconds
The Expires value of the REGISTER mes-
sage which received from DT800/DT700
terminal is out of range or when the Expire
value is not set up, in case it assigns the
effective time to the DT800/DT700 termi-
nal. The timer for supervising whether
DT800/DT700 terminal is connected or
not.
180 seconds
02 Subscribe Expire Tim-
er
60 ~ 65535 seconds The subscribe Expire timer to transmit and
receive the terminal operation instructions
between the Main Device and DT800/
DT700 terminal.
3600 seconds
03 Session Expire Timer 0 ~ 65535 seconds Set effective time for supervising the Voice
Path.
180 seconds
04 Minimum Session Ex-
pire Timer
0 ~ 65535 seconds Set minimum value of effective time for su-
pervising the Voice Path.
180 seconds
05 Invite Expire Timer 0 ~ 65535 seconds Set effective time for Incoming/Outgoing
call when the Expire value is not set in the
INVITE message received from DT800/
DT700 terminal.
180 seconds
06 Signal Type of Serv-
ice
0x00 ~ 0xFF
(0 ~ 9, A ~ F)
Set Type of Service value which applied to
send SIP Message Packet from DT800/
DT700 terminal to Main Device.
00
07 Error Display Timer 0, 60 ~ 65535 seconds 0
08 Digest Authorization
Registration Expire
Timer
0 ~ 4294967295 sec-
onds
0
10 Number of Password
Retries
0 ~ 255
(0 = No Limit)
Input the number of times an incorrect
password can be entered when the securi-
ty key is pressed.
0
11 Password Lock Time 0 ~ 120
(0 = No Limit)
0
12 Reference Number Up to 32 digits
(0 ~ 9,
, #, P, R, @)
No Setting
13 Media Type of Service 0x00 ~ 0xFF
(0 ~ 9, A ~ F)
00
14 Refer Expire Timer 0 ~ 65535 seconds 60 seconds
SL2100 ISSUE 2.0
2-550 Program 84 : Hardware Setup for VoIPDB
Program
84
To Next Page
Loading...
