Program 90 : Maintenance Program
90-02 : Programming Password Setup
Level:
IN
Description
Use Program 90-02 : Programming Password Setup to set the system passwords. For password
entry, the system allows eight users to be defined. Each user can have a:
•
Unique alphanumeric name (up to 10 alphanumeric characters)
• Password entry of up to eight digits (using 0 ~ 9, # and
)
• Password level
The IN level password is used by the System Installer for system programming. The SA or SB level
password cannot access the IN level programs. The reverse type (white on black) just beneath the
Description heading is the program access level. Y
ou can only use the program if your access level
meets or exceeds the level the program requires. (SA level password can access to SA or SB
programs, and SB level password can access to SB programs only.)
NEC Strongly recommended that the User Name and Password should change
regularly to prevent your personal information from being stolen and misused.
Before changing your numbering plan, use the PC Programming or WebPro
Programming to make a backup copy of your system data.
Input Data
User Number 2 ~ 8
Item
No.
Item Input Data Default
01 User Name Maximum 10 characters Refer below
02 Password Up to eight digits Refer below
03 User Level 0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator A)
4 = SB (System Administrator B)
5 = UA (User Administator)
Refer below
Default
User No. User Name Password Level Level Description
2 tech 12345678 2 (IN) Installer Level - Access to all IN level pro-
grams.
3 ADMIN1 0000 3 (SA) System Administrator Level 1 - Restricted
Access
4 ADMIN2 9999 4 (SB) System Administrator Level 2 - More Re-
stricted Access
SL2100 ISSUE 2.0
2-572 Program 90 : Maintenance Program
Program
90
To Next Page
Loading...
