NEC SL2100 - Program 44: ARS;F-Route Setup; System Options for ARS;F-Route

Program 44 : ARS/F-Route Setup
44-01 : System Options for ARS/F-Route
Level:
IN
Description
Use Program 44-01 : System Options for ARS/F-Route to define the system options for the ARS/F-
Route feature.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 ARS/F-Route
Time Schedule
0 = Not Used
1 = Used
If this option is set to
0, the F-Route
table selected is determined only by
the digits dialed without any relation
to the day or time of the call.
If this option is set to 1, the system
first refers to PRG 44-10. If there is
a match, the pattern defined in that
program is used. If not, the F-Route
pattern in PRG 44-09 and time set-
ting in 44-08 are used.
0 44-04
44-05
44-08
44-09
44-10
02 Dial Tone Simu-
lation
1 digit (0 ~ 9)
*
, # cant be used
When first dialed digit matches with
the data set in this Program, system
send simulated DT to calling party
after receiving first digit. Numbering
plan for the dial needs to configure
as F-Route at PRG 11-01.
No Setting
03 Tone Kind 0 = Internal DT
1 = External DT
Set simulated DT kind which can
change the tone used at PRG
44-01-02 and PRG 44-02-04.
0 44-01-02
44-02-04
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
SL2100 ISSUE 2.0
2-424 Program 44 : ARS/F-Route Setup
Program
44