Program 31 : Paging Setup
31-02 : Internal Paging Group Assignment
Level:
IN
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging
Groups (i.e., Page Zones). The setting in this program also determines if the Internal Page Group can
receive Internal All Call Paging. The system can have up to 50 paging groups. An extension can be in
only one Internal Paging Group.
Input Data
Extension Number Maximum eight digits
Item
No.
Item Input Data Description Default Related
Program
01 Internal Paging
Group Number
0 ~ 50
(0 = No Setting)
Assign extensions to Internal Paging
Groups (i.e., Page Zones). The sys-
tem allows up to 50 Internal Paging
Groups. An extension can be in only
one Internal Paging Group.
Port 1 ~ 16 = 1
(Group 1),
Port 17 ~ = 0
02 Internal All Call
Paging Receiv-
ing
0 = Of
f
1 = On
Allow or prevent All Call Internal
Paging for each extension. If al-
lowed, extension can place and re-
ceive All Call Internal Paging an-
nouncements. If prevented, exten-
sions can only make (not receive)
All Call Internal Paging announce-
ments. If combined, Paging zones
should be restricted as well, change
the internal page zone group in Pro-
gram 31-07-01 to 0.
0 31-02-01
Conditions
None
Feature Cross Reference
• Paging, Internal
ISSUE 2.0 SL2100
Programming Manual 2-355
Program
31
To Next Page
Loading...
