NEC SL2100 - Page 450

Item
No.
Item Input Data Description Default Related
Program
03 Additional Data Service Type 1 = 0 ~
255 (Delete digits, 255
= Delete all digits)
Service Type 2 = [Not
used F-Route T
ime
Schedule]
0 ~ 500 (F-Route Table
No.) <PRG 44-05>
[Use F-Route Time
Schedule]
0 ~ 100 (F-Route Se-
lection No.) <PRG
44-04>
Service Type 3 = 0 ~ 4
(Extension Table Area
No.) <PRG 44-03>
For the Service Type selected in
44-02-02, enter the additional data
required.
• 1 : Delete Digit = 0 ~ 255
(255 = Delete All Digits)
• 2 : [Program 44-01 : 0]
ARS/F-Route Table Number = 0 ~
100 (0 = No Setting)
Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Num-
ber = 0 ~ 100 (0 = No Setting)
Refer to Program 44-04.
• 3 : Dial Extension Analyze Table
Number = 0 ~ 4 (0 = No Setting)
Refer to Program 44-03.
0 44-02-01
44-02-02
44-04
44-05
04 Dial Tone Simu-
lation
0 = Off
1 = On
If enabled, this option sends dial
tone to the calling party after the
routing is determined. This may be
required if the central office at the
destination does not send dial tone.
0 44-01-03
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
SL2100 ISSUE 2.0
2-426 Program 44 : ARS/F-Route Setup
Program
44