Item
No.
Item Input Data Description Default Related
Program
07 DP to DTMF Con-
version Options
0 = Automatic
1 = Automatic and
Manual
2 = Manual
Determine how a user can convert a
Dial Pulse (DP) call to a DTMF call.
For each trunk, set the type of DP to
DTMF conversion required. There
are three conversion options: Auto-
matic (0), Automatic and Manual (1),
or Manual (2).
Automatic:
DP to DTMF conversion occurs au-
tomatically if the extension user
waits more than 10 seconds before
dialing the next digit.
Automatic and Manual:
DP to DTMF conversion occurs au-
tomatically if the extension user
waits more than 10 seconds before
dialing the next digit. In addition, the
user can dial # to switch a DP trunk
to DTMF dialing.
Manual:
Users can dial # to switch a DP
trunk to DTMF dialing.
2 21-01-03
08 Answering Con-
dition
0 = Polarity Reversing
(Polarity)
1 = Polarity Reversing
or Timer (Int Digit)
1
21-01-03
09 Busy Tone De-
tection
0 = Disable (No)
1 = Enable (Yes)
0
10 Caller ID 0 = Off (Caller ID not
displayed.)
1 = On ( Caller ID is
displayed.)
Enable or disable a trunk ability to
receive Caller ID information.
1
11 Next Trunk in Ro-
tary if No Dial
Tone
0 = Disable (No)
1 = Enable (Yes)
Use this option to enable/disable the
system ability to skip over a trunk if
dial tone is not detected. This option
pertains to calls placed using Speed
Dial, ARS, Last Number Redial or
Save Number dialed. It does not
pertain to line key or Direct Trunk
Access calls.
0
12 Detect Network
Disconnect Sig-
nal
0 = Disable (No)
1 = Enable (Yes)
1
13 Trunk-to-Trunk
Limitation
0 = Disable (No)
1 = Enable (Yes)
0
17 Synchronous
Ringing
0 = Disable
1 = Enable
1
18 Busy Tone De-
tection on Talk-
ing
0 = Disable
1 = Enable
0
19 Busy Tone De-
tection Frequen-
cy
1 ~ 255 1 14-02-18
20 Busy Tone De-
tection Interval
0 ~ 64800 (x 100 ms) 0 14-02-18
23 Caller ID Receiv-
ing Method
0 = Wait Caller ID
1 = Immediate Ring
Rings extension before receiving
Caller ID (1) or after receiving Caller
ID (0).
1
24 Use Call Waiting
Caller ID
0 = Off
1 = On
Set the Call Waiting Caller ID. 1 14-02-10
ISSUE 2.0 SL2100
Programming Manual 2-119
Program
14
To Next Page
Loading...
