Item
No.
Item Input Data Description Default Related
Program
10 Calling Party
Name notifica-
tion (ISDN Trunk)
0 = Of
f (when set to Off
the system will not
send any outbound
calling party informa-
tion.)
1 = On (when set to ON
the system will send
calling party informa-
tion.)
This program enables/disables the
ability to send calling party name in-
formation on a per station basis.
0
13 Special ringtone
choice
0 = Incoming extension
ring tone
1 = Tone pattern 1
2 = Tone pattern 2
3 = Tone pattern 3
4 = Tone pattern 4
5 = Melody1 (2W Digi-
tal/IP Multiline Termi-
nal)
6 = Melody2 (2W Digi-
tal/IP Multiline Termi-
nal)
7 = Melody3 (2W Digi-
tal/IP Multiline Termi-
nal)
8 = Melody4 (2W Digi-
tal/IP Multiline Termi-
nal)
When an incoming call is received
from the extension defined in this
PRG this item defines the ringtone
presented.
0 15-02-03
14 SMDR output of
made intercom
calls
0 = Disable
1 = Enable
When set 0 it will not record the in-
ternal calls that been made.
0 15-01-49
15 SMDR output of
answered inter-
com calls
0 = Disable
1 = Enable
When set 0 it will not record the in-
ternal calls that been received.
0 15-01-49
16 Line Load Con-
trol Restriction
0 = Not Restrict
1 = Restrict
Port1:0
Other ports :1
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-133
Program
15
To Next Page
Loading...
