NEC SL2100 - Page 216

Item
No.
Item Input Data Description Default Related
Program
13 Set Calling Party
Number
0 = Off (when set to Off
the system will not
send any outbound
calling party informa-
tion.)
1 = On (when set to ON
the system will send
calling party informa-
tion for the station or
trunk.)
Determines if the ISDN calling line
identity presentation and screening
indicators are allowed.
COS 1 ~ 15 = 0 10-03-05
15-01-04
14 Call Address In-
formation
0 = Off
1 = On
COS 1 ~ 15 = 0
15 Block Outgoing
Caller ID
0 = Off
1 = On
Turns off or on the system ability to
automatically block outgoing Caller
ID information when a user places a
call.
If this option is on, the system auto-
matically inserts the Caller ID block
code (defined in Program 14-01-21)
before the user-dialed digits.
COS 1 ~ 15 = 0 14-01-20
14-01-21
16 Display E911 Di-
aled Extension
Name and Num-
ber
0 = Off
1 = On
Turns off or on an extension to dis-
play the name and number of the
extension that dialed E911.
COS 1 ~ 15 = 0
17 ARS Override of
Trunk Access
Map
0 = Off
1 = On
Turns off or on an extension ability
to override the trunk access map
programming for outgoing calls.
COS 1 ~ 15 = 0
19 Hotline for SPK 0 = Off
1 = On
The ability of an extension to have
Hotline activated or deactivated
when going off hook via the speaker
key.
COS 1 ~ 15 = 0 20-08-09
20 Hot Key Pad 0 = Off
1 = On
The ability of an extension to make
a call by just dialing the number
without first going off hook.
COS 1 ~ 15 = 0
21 Automatic Trunk
Seizing by Press-
ing SPK Key
0 = Off
1 = On
The ability of an extension to auto-
matically access Trunk Route when
going off hook via the speaker key.
COS 1 ~ 15 = 0
22 Voice Over to
Busy Virtual Ex-
tension
0 = Off
1 = On
The ability of an extension to make
Voice Over to Busy Virtual Exten-
sion.
COS 1 ~ 15 = 0
23 Display indica-
tion for security
sensor detection
0 = Off
1 = On
Enable (1) or Disable (0) an exten-
sion's ability to display indication for
security sensor detection.
COS 1 ~ 15 = 0
24 Display indica-
tion for emergen-
cy call by remote
inspection
0 = Off
1 = On
Enable (1) or Disable (0) an exten-
sion's ability to display indication for
emergency call by remote inspec-
tion.
COS 1 ~ 15 = 0
Conditions
None
Feature Cross Reference
• Class of Service
SL2100 ISSUE 2.0
2-192 Program 20 : System Option Setup
Program
20