NEC SL2100 - Page 222

Item
No.
Item Input Data Description Default
16 Call Redirect 0 = Off
1 = On
Turns off or on a multiline terminal user
ability to transfer a call to a predefined
destination (such as an operator, voice
mail, or another extension) without an-
swering the call.
COS 1 ~ 15 = 1
17 Department Group
Trunk-to-T
runk Trans-
fer (Each Telephone
Group Transfer)
0 = Off
1 = On
Turns off or on an extension user ability to
set Trunk-to-Trunk Forwarding for a De-
partment Group.
COS 1 ~ 15 = 1
18 Transfer Recall on
Receiving CoS
0 = Off
1 = On
Allow (0)/Deny (1) unanswered Transfer-
red calls from recalling the originating ex-
tension.
COS 1 ~ 15 = 0
19 Hold/Extended Park 0 = Off
1 = On
Determine if an extension Class of Service
should allow either a normal or extended
Park.
COS 1 ~ 15 = 0
20 No Callback 0 = Off
1 = On
Turns off or on an extension to receive
callbacks.
COS 1 ~ 15 = 0
21 Restriction for Tan-
dem Trunking on
Hang Up
0 = Of
f
1 = On
Allow (0) or Deny (1) an extension user
ability to set up a tandem/conference call
automatically when they hang up.
COS 1 ~ 15 = 0
22 Restricted Unsuper-
vised Conference
0 = Allow
1 = Deny
Allow (0) or Deny (1) an extension ability
to initiate an unsupervised conference.
COS 1 ~ 15 = 0
23 CAR/VE Call Forward
Set/Cancel
0 = Off
1 = On
Turn on or off an extension ability to set or
cancel call forwarding for a virtual exten-
sion.
COS 1 ~ 15 = 1
24 Trunk Park Hold
Mode
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
Set the hold type when a trunk call is put
on hold by an extension.
COS 1 ~ 15 = 1
25 T
ransfer Park Call 0 = Off
1 = On
Turn off or on an extension ability to trans-
fer a parked call.
COS 1 ~ 15 = 1
26 Station Park Hold
mode
0 = Off
1 = On
COS 1 ~ 15 = 0
27 Call Park Search 0 = Off
1 = On
COS 1 ~ 15 = 1
28 Both Ring Enhance-
ment
0 = Normal
1 = Enhanced
COS 1 ~ 15 = 0
30 Disable Call FWD In-
dication on LCD
0 = Off
1 = On
When set to 1, Call FWD setting is not
shown on the terminal LCD.
COS 1 ~ 15 = 1
31 Transfer to Remote
Conference
0 = Off
1 = On
Use this option to enable or disable an ex-
tensions ability to transfer a call to a re-
mote conference.
COS 1 ~ 15 = 1
Conditions
None
Feature Cross Reference
• Class of Service
SL2100 ISSUE 2.0
2-198 Program 20 : System Option Setup
Program
20