NEC SL2100 - Page 517

Item
No.
Item Input Data Default
08 OFF Minimum Time 0 ~ 255 (30 + 30 ~ 7680 ms) Refer below
09 OFF Maximum Time 0 ~ 255 (30 + 30 ~ 7680 ms) Refer below
12 Frequency No. 1 1 ~ 8
(Frequency Table No. set by 80-07)
Refer below
13 Frequency No. 2 0 ~ 8 (0 = Not Used)
(Frequency Table No. set by 80-07)
Refer below
Default
Item Name Type 1 (DT) Type 2 (BT) Type 3 (RBT) Type 4 Type 5
1 Detect Level 0 0 0 0 0
2 Min. detect level 15 (- 25 dBm) 15 (- 25 dBm) 15 (- 25 dBm) 15 (- 25
dBm)
1
3 S/N ratio 4 (- 20 dB) 4 (- 20 dB) 4 (- 20 dB) 1 0
4 No tone time 132 (3990 ms) 132 (3990 ms) 132 (3990 ms) 132 (3990
ms)
0
5 Pulse Count 1 1 1 2 2
6 ON min. time 45 (1380 ms) 12 (390 ms) 23 (720 ms) 3 (120 ms) 5
7 ON max. time 0 20 (630 ms) 74 (2250 ms) 13 (420 ms) 15
8 OFF min. time 1 (60 ms) 12 (390 ms) 59 (1800 ms) 3 (120 ms) 2
9 OFF max. time 1 (60 ms) 20 (630 ms) 232 (6990 ms) 13 (420 ms) 5
12 Frequency No 1 1 3 2 3 1
13 Frequency No 2 2 4 3 4 2
14 Twist Level 0 0 0 0 0
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-493
Program
80