-94-
1. Specify source slot
Sepecify the source element address to transfer the cartridge.The slot where the cartridge is stored
is displayed.
Element Address can be narrowed with Row and Slot.
2. Specify destination slot
Sepecify the destination element address to transfer the cartridge.The slot where no cartridge is
stored is displayed.
Element Address can be narrowed with Row and Slot.
3. Slot map
Slot information is displayed in similar Library Map. The source slot and the target slot can be
selected from this map.
It specifies as a source slot when the slot where the cartridge is stored is selected and it is
specified as a target slot when the slot where no cartridge is stored is selected.
4. Move button
After specifying the source slot and the destination slot, move cartridge starts by clicking the
move button.
To Next Page
Loading...
