NEC T30A - Basic Operation of Encryption Key Management Function; Setup

-128-
6.2 Basic Operation of encryption key management function
This chapter describes the most basic operations under the conditions below. If you want to perform
operations under other conditions, make sure that you fully understand the description in this chapter,
and then go to “Advanced Operations” .
[Conditions]
Item
Condition
Tape media in the Library
All are LTO6 / LTO7 medium.
Key to be used
Master key only (Encryption keys are not used.)
Sharing tape medium among multiple libraries
Enabled by setting the same master key.
6.2.1 Setup
To set up the encryption key management function, perform the following procedure:
To set up the function
Registering the activation key
(See 6.2.1.1)
Enabling the encryption key management function
(See 6.2.1.3)
Registering (importing) the master key
(See 6.2.1.4)
Done
Exporting (backing up) the master key
(See 6.2.1.5)