-171-
10.4 Replacing the Contoller Board
1. The supervisory service of all the services of backup software, a tape, and a changer driver is
suspended.The Windows version Networker stops a server.
2. If there is a cartridge in the drive, move it to the magazine slot by using the backup software or by
using the operating panel.
3. Save the maintenance information, referring to "10.1.1 Saving Maintenance Information".
4. Turn off the power to the library.
5. Remove rack ear L.
To remove it, push its underside.
Push the underside of the rack ear and remove it.
To Next Page
Loading...
