-106-
4. IPv6 Settings
When "Use IPv6" is checked, the IPv6 protocol is used for communications.
Obtain an IP address automatically(Stateless Auto Config):
Information is retrieved from a router advertisement, and the IPv6 address, prefix length, and
gateway are set automatically.
Obtain an IP address automatically(DHCP):
Information is retrieved by DHCP, and the IPv6 address, prefix length, and gateway are set
automatically.
Use static IP address
The IPv6 address, prefix length, and gateway are set manually.
5. DNS Settings
"Use DNS" is checked when using DNS settings.
6. Submit button
This button is used to confirm settings. When the settings are completed, a normal end message
will appear.
To Next Page
Loading...
