NEC T30A - Page 233

-206-
Library error code (12/16)
Code(
H
)
Description
Panel
Indicator
Action
00B0
Cannot detect existence of medium in picker when
medium picking motion ends.
(FRU)
Maintenance chassis
CONTROLLER BOARD
CHK
00B0
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B1
No medium in intended cell (cell empty).
(FRU)
Maintenance chassis
CONTROLLER BOARD
CHK
00B1
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B2
Detected medium in picker when CTRG CHECK
motion ends.
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B2
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B3
Detected medium in picker when medium putting
motion ends.
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B3
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B4
Reserved
－
00B5
Picker move error #1 (Defect in moving to RVS
position (P1) during GET mothion (Detected picker
origin or FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B5
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B6
Picker move error #2 (Defect in moving to FWD
position (P2) during GET mothion (Not Detected
picker origin or FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B6
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B7
Picker move error #3 (Defect in moving to medium
extrusion/medium position (P3/P4/P5/P6) during
GET mothion (Detected picker origin or Not
detected FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B7
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B8
Picker move error #4 (Defect in moving to RVS
position (P1) during PUT mothion (Detected picker
origin or FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B8
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00B9
Picker move error #5 (Defect in moving to FWD
position (P2) during PUT mothion (Not Detected
picker origin or FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00B9
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00BA
Picker move error #6 (Defect in moving to medium
extrusion/medium position (P3/P4/P5/P6) during
PUT mothion (Detected picker origin or Not detected
FWD).)
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00BA
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00BB
Reserved
－
00BC
Cannot detect picker origin during initializing.
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00BC
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00BD
Detected condition of stop moving during picker
motion.
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00BD
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
00BE
Reserved
－
00BF
Detected condition of not existing GAP when picker
motion ends.
(FRU)
Maintenance chassis, CONTROLLER BOARD
CHK
00BF
1. To power cycle the library.
2. Check the medium.
3. Check magazine how the media
inserted.