SECTION 6
MAINTENANCE
122
Inspect/Clean Service Station
The Service Station (located directly under the Printhead Assembly) cleans Printhead Cartridge of excess ink and
debris, keeps Printhead hydrated and protected when not in use, captures and removes ink used to keep nozzles
clear. It moves out of the way of the Printhead during printing. It is designed to provide a long service life.
Inspect the Service Station
To access the Service Station for inspection and cleaning:
1. Using the Touchscreen, select “Menu,” and
tap “Maintenance” from the drop-down menu.
Tap “Inspect Sled”. The Service Station [A]
moves out from under the Printhead Assembly.
2. Open the Top Cover.
3. Visually inspect the Service Station for cleaning
or service.
Use a dry, lint-free cloth to soak up any excess
ink from the Cap Station [B].
4. Tap “End Inspection” on the Touchscreen
to move the Service Station back under the
Printhead Assembly.
5. Close the Top Cover.
To Next Page
Loading...
Need help?
General
