SECTION 5
DISASSEMBLY AND ASSEMBLY
43
SECTION 5 – Disassembly/Assembly Procedures
Printer Basic Disassembly
Turn off Power
Disconnect Power Cord
Disconnect Interface Cable
Service Disassembly Procedures
WARNING!
THE FOLLOWING DISASSEMBLY SHOULD ONLY BE DONE BY A QUALIFIED,
TRAINED SERVICE REPRESENTATIVE.
WARNING!
ALWAYS POWER DOWN PRINTER BEFORE CONNECTING OR
DISCONNECTING ANY WIRING HARNESSES OR CABLE CONNECTIONS TO
AVOID SERIOUS SHOCK OR INJURY.
CAUTION
ALWAYS USE APPROPRIATE PERSONAL PROTECTION EQUIPMENT (PPE).
DISPOSE OF ALL MAINTENANCE WASTE IN ACCORDANCE WITH
LOCAL REGULATIONS.
CAUTION
USE ELECTROSTATIC DISCHARGE (ESD) PROTECTION WHEN WORKING
AROUND ELECTRONIC DEVICES:
USE STATIC-FREE WORKSTATIONS WHEN UNIT COVERS ARE REMOVED.
WEAR GROUNDED WRIST STRAPS WHEN WORKING ON UNIT.
TRANSPORT ELECTRONIC SUBASSEMBLIES IN SEALED STATIC-
SHIELDING PACKAGING
.
To Next Page
Loading...
Need help?
General
